Monitoring the tires when you are out for the track day or when you are racing is one of the main things you can do to make the car as functioning as fast as possible with minimal effort. The tyres are the final point of contact between the vehicle and ground. Therefore, they feel in transmitting huge amounts of information from suspension set up and also storing lots of information that will help in measuring for helping fine tune the geometry to make tires in an efficient way with ground for making the car go faster smoothly.
When understeer or oversteer starts, it can be too easy to start adjusting the dampers and anti-roll bars for solving the issues when you are looking back at the tires that might have all the answers needed to solve the issues. You can also use the tyre temperature sensor for maintaining the condition of the tyres to the best possible way.
What Equipment Is Needed?
There are two types of equipment needed for measuring the tyres and gauging the performance at the tracking side for improvement to be made.
- Tyre Pressure Gauge
The tyre pressure is the affordable type of equipment and an accurate digital platform that can be bought for $20. It is pressed on the tyre valve and also displays the pressure within the tyre can be recorded and the tyres can have readings that are being compared against each other.
- Tyre temperature Pyrometer
The tyre pyrometer is highly expensive but can get delivered information for helping fine tune and grip the car. It is the temperature probe that can be pressed in the rubber for producing the temperature across the width of the tire stored within the rubber to be placed below the surface. These values for all the vehicle tyres are compared against each other for finding tune and set up. If you are on the serious track day then it is recommended to buy one and if you are a racer, then it is advised to buy one of the major advantages to outweigh the cost of the tool. A good tyre pyrometer is also purchased within a low price.
How To Measure The Tyre Pressure
One of the most effective ways for measuring the tire pressure is with the help of a hand pressure gauge as when the car comes and goes off the track. When the car returns from the circuit no time should be wasted getting this tyre pressure as they will start to change and drop as the tyre cools back down easily. Therefore, it is very important to hand the job to the friend so that the car is stopped when they press the gauge on the tyre valve for getting the immediate readings.
Most people use the tyre temperature sensor for measuring the tyre temperature which is very important to control the functioning of the same. Make use of the best sensors so that you can detect the temperature fluctuation in no time.
